Largest stockist and authorized distributor of IS 2062 Grade E350 BR / B0 / C high-tensile steel plates in Sachin GIDC, Surat. Primary mill sourcing from SAIL, JSPL, and Tata Steel tailored for Pre-Engineered Building (PEB) fabricators, heavy crane girders, and bridge construction.
Pre-Engineered Building (PEB) manufacturing in India has seen a massive technological transformation. Heavy industrial sheds, logistics warehouses, and clear-span structures now universally specify IS 2062 Grade E350 steel plates rather than standard mild steel (E250). With a guaranteed minimum yield strength of 350 N/mm² (MPa), E350 plates empower structural engineers to design slender, lighter built-up sections that support equal or greater load conditions.
As one of the most reliable E 350 plates suppliers in Surat and South Gujarat, New Bengal Steels maintains comprehensive ready stocks ranging from 6.0 mm to 100.0 mm thickness at our Sachin GIDC stockyard. Sourced directly from integrated primary producers—SAIL, Jindal Steel & Power Ltd (JSPL), and Tata Steel—our plates guarantee superior surface flatness, consistent thickness tolerance, low Carbon Equivalent (CEV) for effortless welding, and sub-zero impact toughness.
| Parameter | IS 2062 E350 BR | IS 2062 E350 B0 | IS 2062 E350 C | International Equivalent |
|---|---|---|---|---|
| Yield Strength (Min) | 350 MPa (<20mm) / 330 MPa | 350 MPa (<20mm) / 330 MPa | 350 MPa (<20mm) / 330 MPa | EN 10025 S355JR / ASTM A572 Gr. 50 |
| Tensile Strength | 490 - 630 N/mm² | 490 - 630 N/mm² | 490 - 630 N/mm² | 490 - 630 N/mm² |
| Elongation (Min) | 22% (GL 5.65√So) | 22% (GL 5.65√So) | 22% (GL 5.65√So) | 22% |
| Impact Test (Charpy V-Notch) | Optional / Room Temp | Min 27 Joules at 0°C | Min 27 Joules at -20°C | S355J0 (0°C) / S355J2 (-20°C) |
| Max Carbon % | 0.20% max | 0.20% max | 0.20% max | Controlled low-carbon chemistry |
| Weldability (CEV) | Max 0.42 (High Weldability) | Max 0.42 (High Weldability) | Max 0.42 (High Weldability) | Suitable for automated SAW welding |
In a Pre-Engineered Building portal frame, 70% of the total primary tonnage lies in the tapered rafters and rigid frame columns. Because steel yield capacity jumps from 250 MPa to 350 MPa (a 40% increase in load capacity):
| Thickness Range | Standard Widths | Lengths Available | Key Application in PEB & Industry |
|---|---|---|---|
| 6 mm - 10 mm | 1500 mm, 2000 mm, 2500 mm | 6,000 mm to 12,500 mm | PEB tapered rafter webs, interior column webs, stiffener plates |
| 12 mm - 20 mm | 1500 mm, 2000 mm, 2500 mm | 6,000 mm to 12,500 mm | Primary column flanges, rafter flanges, crane runway girder webs |
| 22 mm - 40 mm | 1500 mm, 2000 mm, 2500 mm | 6,000 mm to 12,000 mm | Heavy crane girder top/bottom flanges, beam-to-column moment splices |
| 45 mm - 100 mm | 1500 mm, 2000 mm, 2500 mm | Up to 10,000 mm | Heavy column base plates, anchor shoe plates, heavy industrial press beds |
Critical PEB built-up welded connections cannot tolerate internal plate laminations, inclusions, or voids. At New Bengal Steels:
Plates supplied with 100% UT testing as per ASTM A435 / A578 Level II/III standards for critical crane and flange applications.
Every plate displays visible mill paint markings and stamped heat numbers matching our 100% original manufacturer MTC copies.
Save logistics coordination by combining your E350 plate requirements with structural beams and coils from a single authorized distributor: